Rollkit EVM Single Sequencer Setup Guide

Introduction

This guide covers how to set up and run the Single Sequencer implementation of Rollkit EVM rollups. This implementation provides a centralized approach to transaction sequencing while using EVM as the execution layer.

Prerequisites

Before starting, ensure you have:

• Go 1.20 or later
• Docker and Docker Compose
• Access to the go-execution-evm repository (op-geth branch)
• Git

Setting Up the Environment

1. Clone the Rollkit Repository

git clone https://github.com/rollkit/rollkit.git
cd rollkit

2. Build the Rollkit EVM Single Sequencer Implementation

make build-evm-single
make build-da

This will create the following binaries in the build directory:

• evm-single - Single sequencer implementation
• local-da - Local data availability node for testing

Setting Up the Data Availability (DA) Layer

Start the Local DA Node

cd build
./local-da start

This will start a local DA node on the default port (26658).

Setting Up the EVM Layer

1. Clone the go-execution-evm Repository

git clone https://github.com/rollkit/go-execution-evm.git
cd go-execution-evm
git checkout op-geth

2. Start the EVM Layer Using Docker Compose

docker compose up -d

This will start Reth (Rust Ethereum client) with the appropriate configuration for Rollkit.

3. Note the JWT Secret Path

The JWT secret is typically located at go-execution-evm/docker/jwttoken/jwt.hex. You'll need this path for the sequencer configuration.

Running the Single Sequencer Implementation

1. Initialize the Sequencer

cd build
./evm-single init --rollkit.node.aggregator=true --rollkit.signer.passphrase secret

2. Start the Sequencer

./evm-single start \
  --evm.jwt-secret $(cat /path/to/go-execution-evm/docker/jwttoken/jwt.hex) \
  --evm.genesis-hash 0x0a962a0d163416829894c89cb604ae422323bcdf02d7ea08b94d68d3e026a380 \
  --rollkit.node.block_time 1s \
  --rollkit.node.aggregator=true \
  --rollkit.signer.passphrase secret

Replace /path/to/ with the actual path to your go-execution-evm repository.

Setting Up a Full Node

To run a full node alongside your sequencer, follow these steps:

1. Initialize a New Node Directory

./evm-single init --home ~/.rollkit/evm-single-fullnode

2. Copy the Genesis File

Copy the genesis file from the sequencer node to the full node:

cp ~/.rollkit/evm-single/config/genesis.json ~/.rollkit/evm-single-fullnode/config/

3. Get the Sequencer's P2P Address

Find the sequencer's P2P address in its logs. It will look similar to:

INF listening on address=/ip4/127.0.0.1/tcp/26659/p2p/12D3KooWXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

4. Start the Full Node

./evm-single start \
  --home ~/.rollkit/evm-single-fullnode \
  --evm.jwt-secret $(cat /path/to/go-execution-evm/docker/jwttoken/jwt.hex) \
  --evm.genesis-hash 0x0a962a0d163416829894c89cb604ae422323bcdf02d7ea08b94d68d3e026a380 \
  --rollkit.node.block_time 1s \
  --rollkit.node.aggregator=false \
  --rollkit.p2p.peers <SEQUENCER_P2P_ID>@127.0.0.1:26659

Replace <SEQUENCER_P2P_ID> with the actual P2P ID from your sequencer's logs.

Verifying Node Operation

After starting your nodes, you should see logs indicating successful block processing:

INF block marked as DA included blockHash=XXXX blockHeight=XX module=BlockManager

Configuration Reference

Common Flags

Flag	Description
--rollkit.node.aggregator	Set to true for sequencer mode, false for full node
--rollkit.signer.passphrase	Passphrase for the signer
--rollkit.node.block_time	Block time for the Rollkit node

EVM Flags

Flag	Description
--evm.eth-url	Ethereum JSON-RPC URL (default http://localhost:8545)
--evm.engine-url	Engine API URL (default http://localhost:8551)
--evm.jwt-secret	JWT secret file path for the Engine API
--evm.genesis-hash	Genesis block hash of the chain
--evm.fee-recipient	Address to receive priority fees

Conclusion

You've now set up and configured the Single Sequencer implementation of Rollkit EVM rollups. This implementation provides a centralized approach to transaction sequencing while using EVM as the execution layer.